(Open by Appointment)


(1 customer review)

$1,300.00 $1,199.00

BAFANG BBSHD-1000W – This motor is strictly for offroad use only, with 1500 watt peaks this motor has an amazing torque.

Out of stock



The most powerful and reliable Mid Drive Kit on the market
Complete redesign of the BBS02 series for more power and more heat sink to keep the motor cooler
1500 watts of peak power (in off road mode)
No technical knowledge necessary to install
Water resistant

Kit Includes

  • BBSHD 1000 Watt Middrive
  • Includes DCP-18 or C500 display
  • 46t stock steel chainring
  • Universal thumb Throttle
  • Spacer kit
  • Everything you need to convert most bikes

Optional Extras are:

  • Bafang Hydraulic and Disc Brake Sensors E-Brake (Pair)
  • Gear sensor
  • Programming cable so you can adjust your own programming settings

Shipped and supported from Perth Australia read about us here

Motor is programmed by default to 1000W and is for off roaD ONLY



Amazing Kit for an affordable price

Current display choice



  • 9 Levels of assist.
  • The most recent display released from Bafang.
  • Advanced settings now changeable in the main menu.
  • Error code list so no more memorizing codes.
  • Full color with an updated sleek speedometer design.
  • USB output for charging your cell phone or other small devices.


One of the biggest criticisms of the BBSHD is the ugly and heavy steel sprocket that is geared to high (46t). We include that stock sprocket in case you want the higher gear reduction.

Eolectric Cycles has its own version of the 42 tooth wide narrow Aluminium Chainring in 7075 Alloy



The BBSHD is a complete redesign of the extremely popular mid drive the BBS02, every part is stronger and better. The BBSHD put out 150nm of force so much torque that you can stay in one gear and not shift as much as you would in the smaller drive.

This kit is for bottom bracket sizes of the most common sizes 68mm and 120mm (fat bike). Other BB sizes can be made to fit with our spacer kit. Read up about dealing with intrusive chainstays(article on fitting here)

The BBSHD heralds a new age of factory installed mid-drives. Unlike most other factory mid drives the BBSHD is designed to be mounted onto almost any bicycle currently manufactured. You can mate the BBSHD to any bike with a bottom bracket that is anywhere from 68mm to a much wider 100mm fat bike. The BBSHD is even now made in odd sizes (72mm & 120mm), including extra fat. We include with every kit so that you can make your BBSHD fit for almost any bottom bracket. If in doubt order the next size up….and our spacers will help you make the kit fit.

Install it on anything and ride it anywhere. With the proper gearing the BBSHD will easily climb stairs, go well over 30mph on the flats and much, much faster down hills. Singletrack trail-riding, cargo bikes, high-speed commuters the BBSHD can do it all.

The BBSHD excels at singletrack riding (article on singletrack testing here) as well as soft sand (article on soft sand testing) and works best with the Lunacycle Eclipse ring (independently reviewed here) or the Mighty-Mini chainring (available here). The stock 46T steel chainring on this kit is very heavy and has too many teeth for trailriding, although it works fine for commuting.

Its predecessor the BBS02 would sometimes falter if run at peak power for too long of a time but those days are over with the BBSHD. Completely redesigned with thicker windings, giant heat dissipating fins and a powerful 12 FET controller. There is nothing else like it on the market.

Go ahead, beat on it, the BBSHD was designed to take all of your abuse and more.


Which Bike?

The Bafang drive mounts in place of your current bike’s bottom bracket and replaces your bike’s crank set and front derailleur if you have one.

The BBSHD can be mounted in a wide range of bottom brackets from 68mm to 120mm. To pick which motor works right for you: please see this guide. For most applications you need the standard size (68mm), and can even go a few millimeters over the usual limit of 73mm with standard by using loctite on the axle instead of the second lockring.

Our BBSHD kits come with one spacer kit good for 10mm total, if using a 100mm fatbike motor on a regular bike (73mm) some additional spacers may be needed. Please include a comment at checkout of more spacers are required. (If possible we recommend using the correct motor for your bike for the best possible chainline in order to prevent chain derailment)

Many people have found that the Bafang can actually be mounted to many types of trikes, which can be fun since many trikes are not good candidates for hub motor kits.

Maybe you have an old donor bike laying around you want to convert, or maybe you are wide open to which bike to buy and install this kit on.

If you are also shopping for a bike to install this kit, that is perfect. We recommend you pick a bike that is known to be compatible with this drive and has no known issues. Ideally a build report has been written on our builder forum so that you can follow step by step someone else’s building steps.

1 review for BAFANG BBSHD-1000W

  1. Philip Dale

    A tough motor, aids in a smooth ride. Could install it without any hassle. Makes the ride uphill effortless and super fun. Couldn’t think of anything better than this motor kit!

Add a review

Your email address will not be published. Required fields are marked *

Free Shipping Australia Wide

On all kits, batteries and accessories over $100.00. Bikes, Scooters and Quads call for shipping quote.

12 Months Warranty on All Products

Excellent After Sales Support

Content Protection by DMCA.com